24/7 Field Service Engineer Hotline: +1-800-783-7477 UDI Look-up · GPO Contracts: Premier · Vizient · HealthTrust
Steris Clinical Article

A practice administrator's story about picking the lowest equipment quote — and the hidden battery, software, and service costs that decided the real total.

Elena Varga

A practice administrator's story about picking the lowest equipment quote — and the hidden battery, software, and service costs that decided the real total.

Clinical equipment planning desk

The Monday My “Three Quotes” Rule Fell Apart

In September 2023, our practice opened a satellite clinic about forty minutes from our main campus. I’m the office administrator for a 180-person multi-specialty group, and I handle procurement—roughly $3.2 million a year across some thirty vendors. When a new site opens, the equipment list lands on my desk whether it’s a wheelchair or a box of gloves.

That quarter we had four big-ticket needs: a power wheelchair for the rehab suite, an intraoral scanner for the dental team, a continuous glucose monitor program for endocrinology, and imaging equipment for the new scanning room. And yes, I had to look up what nuclear medicine actually is before the first vendor call. Short version: it’s diagnostic imaging that uses small amounts of radioactive tracers to see how organs are working, not just what they look like. The most common tracer has a half-life of about six hours, so the supply chain runs on same-day delivery and the licensing paperwork never really stops.

Our CFO’s rule was simple. Get three quotes, pick the middle one, document why. That works fine when the quotes cover the same scope. It stops working when one vendor quotes a chair and another quotes “a chair plus the first two years of everything you’ll actually need.”

What I Thought I Was Comparing

The rehab lead had used a Permobil M300 at her previous clinic and wanted the same model. Fine by me—I don’t have clinical opinions, I have budget opinions. I sent the request out and got three responses. The lowest was about 12% under the middle quote. Not huge, but enough that finance wanted a reason to ignore it.

Then one of our biomed techs caught something I’d missed. He pulled up the spec sheets and pointed at the power section. The Permobil M300 battery spec calls for Group 24 AGM—sealed lead-acid, basically. Heavier, needs watering discipline on some chargers, and it ages differently from lithium. Meanwhile the Permobil M3 Corpus battery type is lithium-ion. Same brand, different platform, completely different power system.

Why did that matter? Because our main campus had a spare battery kit in storage from an older M3 Corpus chair, and I’d quietly assumed it would work across the fleet. It wouldn’t. The connector, the charger profile, the whole setup—different. From the outside, a battery is a battery. The reality is that mixing platforms means you’re stocking two separate maintenance kits and training staff on two sets of procedures.

“From the outside, the lowest quote looked like the efficient choice. The reality was that it pushed the hardest parts of the work onto us.”

The Line Items Nobody Put at the Top

The chair quote wasn’t the only one hiding things. Here’s something the sales rep didn’t volunteer on the intraoral scanner: the hardware price was fine, but the scan-processing software ran on an annual license, and the cloud storage tier was billed per seat. Three chairs, two hygienists, one dentist—suddenly the “cheap” scanner had a monthly cost that kept going after the invoice was paid.

The continuous glucose monitor program had the same shape. The reader was bundled free with a starter pack. The sensors weren’t. Sensors get replaced every ten to fourteen days depending on the system, so the annual consumable cost was roughly four times the device cost. I’d budgeted for the device and forgotten the subscription underneath it.

And the nuclear medicine room? I didn’t pretend to understand the clinical side. I hired an outside consultant for the licensing and shielding review, and I kept my scope to the service contract and the delivery schedule. That was the one place I didn’t try to save money by cutting corners, mostly because the compliance risk was obvious even to me.

Where the Cheap Quote Broke

We went with the low bid on the M300. On paper it saved about $2,100. For the first two weeks, everyone was happy.

Then the rehab lead started noticing the chair wasn’t holding a full shift on a charge. Not a defect, exactly—the AGM batteries were within spec, but the spec assumed a lighter user profile and shorter runs than our actual schedule. The vendor’s service agreement quoted us a per-visit rate of $475 plus parts, and the battery replacement window was shorter than what we’d assumed for lithium. The training session on battery care and charging routines? That was an add-on. I’d assumed it was included because the middle quote had bundled it.

I added it up over a three-year horizon. The $2,100 savings turned into roughly $3,900 in extra service visits, one replacement set, and about eleven hours of my staff’s time coordinating it. That doesn’t count the two weeks the chair sat half-used while we waited on a charger adapter that the low bidder hadn’t mentioned.

Looking back, I should have asked for a total-cost-of-ownership sheet instead of a unit price. At the time, I was proud of myself for getting three quotes and picking a low one. But given what I knew then—nothing about AGM versus lithium charging profiles—my choice was reasonable. It just wasn’t informed.

What I Do Differently Now

The next quarter, I rebuilt our equipment request form around four questions. I make every vendor answer them in writing, and I don’t accept “that’s standard” as an answer anymore.

  1. What’s the full consumable and subscription cost for 36 months? Sensors, software seats, cloud tiers, filters, batteries. If a vendor can’t produce a number, that’s a data point too.
  2. Which parts are platform-specific? This is where the Permobil M300 battery question lives. Same-brand doesn’t mean interchangeable, and I now ask for a compatibility matrix before I sign.
  3. What’s included in training and the first service visit? I’ve learned that “included” and “available” are different words, and vendors use them very carefully.
  4. Who owns the compliance paperwork? For anything involving tracers or licensed equipment, I want the responsibility named in the contract, not implied in a phone call.

The intraoral scanner and the glucose monitor program both went out on bundled contracts the second time around. The permobil chair we eventually bought came with a documented battery-care protocol, a maintenance calendar, and a service line that answers on the first call. It cost more on the invoice and less everywhere else.

My takeaway is boring and it’s the one I keep repeating to our finance team: the cheapest quote is a price, not a cost. When I’m evaluating equipment, I’m not buying a box—I’m buying the next three years of what happens after the box arrives. And in my experience managing these purchases since 2020, the gap between the two is where most of the money actually goes.

Request supporting documents View related products
Elena Varga

Elena Varga

Elena Varga is a medical imaging systems analyst covering CT scanners, MRI systems, ultrasound platforms, digital radiography, mammography, and ophthalmic imaging equipment. She references IEC 60601-2-44 for CT safety and essential performance while examining CTDIvol, dose-length product, spatial resolution, slice thickness, field uniformity, throughput, uptime, and DICOM interoperability. Her work helps radiology leaders, medical physicists, biomedical engineers, and procurement teams compare image quality, radiation management, workflow integration, serviceability, and lifecycle cost.

PreviousAn office administrator's honest account of managing a dental equipment procurement project — from underestimating 'dental chair' costs to the compliance mistake that cost $4,200. If you're a non-clinical buyer handling Planmeca dental chairs, dental autoclaves, or any clinical equipment, this is the checklist I wish someone had given me. NextA quality and regulatory affairs manager on why ENT endoscopes, fundus cameras, and Holter monitors keep underperforming in clinical practice despite passing procurement review—and what actually closes the gap between spec sheets and clinical reality.

Discuss this article